Power Recliner Stopped Working? Where to Start: Power Supply, Remote, Control Box or Motor
"My recliner's broken. How do I know where to start?" Is it the motor, the power supply, or the control box? We use a sequential diagnosis process. Start with the easiest and least expensive part and work your way through.
Step 1: Power Supply
Check your power supply first. Most have a light. Green is usually a good sign. No light or a red light means you need to check your power supply. Shop replacement power supplies.
Step 2: Remote or Button Control
If the power supply works, move to the switch or remote. If some functions work but others don't (say the power headrest or lumbar works but the recline doesn't), it's probably the remote. And if nothing works at all, a remote or button is still usually the easier and less expensive place to start.
Buttons wear out over time, especially when kids or grandkids play with them back and forth. Shop replacement remotes and replacement button controls.
Step 3: Control Box or Junction Box
The control box (or junction box) is the brains of the chair, and everything routes into it. If you've replaced the power supply and the remote and nothing's working, it's probably the control box. Take a picture and send it to us.
Step 4: Motor
Motors last a really, really long time. The telltale sign is noise. If your chair stopped working but you still hear a grinding or humming noise, the chair is sending a signal to the motor but the motor isn't working. Something could be broken, or the screw drive could be stripped. Send us a picture of your motor and we'll tell you which one you need. Shop replacement motors.
We'll Help You Get the Right Part
Diagnosing a chair is sometimes an iterative process. Our goal is to get you the right part and your recliner working again. If the first part doesn't fix it, you can return it, with no restocking fee, while we get you the part you really need.
Frequently Asked Questions
What should I check first on a broken power recliner?
The power supply. Then the remote or button control, then the control box, and lastly the motor.
How do I know if it's the motor?
If you hear grinding or humming when you press the button but the chair doesn't move, it's usually the motor.
Some of my buttons work but not others. What's wrong?
That usually points to the remote or button control.
Browse all of our furniture parts.
Leave a comment