Recliner Humming, Grinding or Not Moving? Signs Your Power Recliner Motor Needs Replacing
Can I fix my recliner motor, or do I have to replace it? It's a great question. Here's what we see every day, and how to tell when the motor is the problem.
Signs the Motor Is the Problem
The remote lights up, but the chair won't move
If your remote has power and your power supply is good, the issue is your motor.
Humming but not moving
A hum with no movement means the motor is getting the signal but can't do the work.
Clicking or grinding
If your motor is clicking or grinding, it usually just means it's old or bad and needs to be replaced. It's not the end of the recliner. It can be fixed.
Can the Motor Be Repaired?
No. We only sell the whole motor and actuator. A new motor comes with everything you need. You can't replace just the parts inside, because these motors are gear driven. You must replace the whole motor if:
- The block breaks off. It's plastic and moves the whole recliner. It usually breaks when something gets stuck in front of the footrest and the chair keeps pushing.
- The end that holds the clevis pin breaks. On lift chair motors this end piece can be steel, aluminum or plastic, and you can't replace just the shaft.
- The cables are cut by a pet or caught in the mechanism.
- The gear drive is stripped and just spins.
How to Get the Right Replacement
Send us a picture of the whole motor, especially the label (sometimes it's on the bottom) and the connections. We'll tell you exactly which motor you need. Shop replacement motors.
Frequently Asked Questions
Why does my recliner hum but not move?
The motor is receiving power but has failed. The whole motor needs to be replaced.
Can I replace just the broken plastic block on my motor?
No. The motor and actuator are replaced as one unit.
Is a grinding recliner worth fixing?
Yes. A grinding motor usually just means it's worn out, and replacing it gets your chair working again.
Browse all of our furniture parts.
Leave a comment